Ready to use, no dilution necessary. Allow new grout installations to cure prior to application.

The product may be applied to damp surfaces after standing water has been removed.
On a clean, dry surface, apply CONTRACTOR'S CHOICE with a paint pad, paintbrush, or lambswool applicator, making sure to fully saturate the surface.Let sit for 10 to 15 minutes, keeping the surface wet with sealer without allowing the sealer to dry on the surface.Then, wipe and rub the surface to allow the product to completely penetrate and remove any excess with a dry cloth, applicator pad, microfiber cloth, lambswool pad or sponge.If a second coat is needed, apply it immediately, keeping the surface wet with sealer without allowing the sealer to dry on the surface.Then, wipe and rub the surface to allow the product to completely penetrate and remove any excess with a dry cloth, applicator pad, microfiber cloth, lambswool pad or sponge.The surface may be used for normal foot traffic after 4 hours.Full cure and maximum sealer protection is achieved in 8 hours.Grout release: CONTRACTOR'S CHOICE may be used as a grout release for new installations on clean and dry surfaces.