OLD-social-instagramapp-storearea-applicatoriarea-privatiarea-produttoriarea-progettistiarea-rivenditoriarrow-downarrow-rightbackbookcalculatorcarousel-leftcarousel-rightcart-2cartclosecontrolsdownloademailenvelopeeyefai-da-te-iconfilterfinituraflaggoogle-playlinklock-altlogo-anniversariologo-fila-2023_negativelogo-fila-2024_negativelogo-fila-footerlogo-fila-footer_2024logo-filalogo-recommendedmailmarker-2marker-filamarkermateriali-esternomateriali-finituramateriali-internomateriali-lavaggiomateriali-manutenzionemateriali-pavimentomateriali-pretrattamentomateriali-protezionemateriali-rivestimentomateriali-topnewsletter-arrownewsletterpagenav-gridpagenav-nextpagenav-prevphone-2phone-filledphoneplay-2playplusprintprofessional-iconprotezionepuliziaquestionsearchshare-facebookshare-googleplusshare-linkedinshare-twittersharesistemislider-arrow-leftslider-arrow-rightsocial-facebooksocial-flickr-bnsocial-flickrsocial-instagramsocial-instagram_newsocial-linkedinsocial-pinterestsocial-twittersocial-youtubetoolbar-apptoolbar-capitolatotoolbar-certificationstoolbar-downloadtoolbar-eyedroppertoolbar-performance-warrantytoolbar-product-compliancetoolbar-product-safetytoolbar-product-sheettoolbar-product-techtoolbar-recycletoolbar-retailertoolbar-supporttoolbar-videotutorialupload-file
Que faire si...

EPOXY PRO

à quoi sert-il ?

  • Eliminates fresh epoxy, urethane and pre-mixed/hybrid grout residue during installation, before it cures.
  • Perfect for cleaning grouting tools after installation.

avantages

  • RAPIDDRY TECHNOLOGY: dries quickly, to be used during installation.
  • Does not damage grout joints.
  • Does not damage or corrode aluminum and steel trims.
  • Safe for the installer and the environment: does not emit harmful fumes.
  • Does not foam, no rising necessary.
  • Use indoors and outdoors, ideal for floors and vertical surfaces.

idéal pour

  • CARREAUX DE PORCELAINE ET DE CÉRAMIQUE, MOSAÏQUE EN VERRE, GRÈS CÉRAME

Mode d’emploi

Ready to use. Thoroughly remove excess grout from the tile before it begins to set, according to the grout manufacturer’s instructions.

Spray HYBRID & EPOXY PRO evenly on the surface.
Let sit for up to 3 minutes.Wipe with a grout sponge without applying too much pressure, then rinse thoroughly.If cleaning takes place a few hours after grouting, let the product sit on the surface for about 20 minutes.Refer to the grout manufacturer’s instructions for indications about when the surface is safe to use.If cleaning does not occur within 24 hours of grouting, then cured epoxy residue may be removed with EPOXYOFF Epoxy Grout Haze Remover.

Attention

Do not use on absorbent materials such as absorbent stone, wood and methacrylate. Test the product before use to determine the material’s resistance and the dwell time required for the product to reach maximum effectiveness. Safety data sheet available upon request.

rendement

24 US oz liq. (710 ml)
  • Carreaux de porcelaine et de céramiquejusqu'à 161 pi² (15 m²)
  • Joints de carreaux grand formatjusqu'à 1 148 pieds linéaires (350 mètres linéaires)
  • Mosaïquesjusqu'à 161 pi² (15 m²)
  • Les rendements sont indicatifs.

Choisissez votre langue