FOB XTREME
à quoi sert-il ?
- Natural look, penetrating sealer that protects all porous natural stone, grout, concrete, quarry tile and terracotta against stains.
- Forms an invisible, protective barrier resistant to moisture and stains while allowing water vapor to escape.
- Suitable for indoor and outdoor surfaces.
- Ideal for the treatment of concrete and quarry tile.
- Perfect for honed marble, limestone and travertine.
- Ideal for use in kitchens, under barbeques, on driveways and in high traffic areas both indoors and outdoors.
avantages
- Protection longue durée.
- Does not yellow or discolor over time.
- UV resistant.
- Les surfaces traitées sont aptes au contact alimentaire.
- Does not alter the frost resistance of terracotta.
- Sans APFO : non cancérogène.
idéal pour
- ALL POROUS NATURAL STONE, GROUT, CONCRETE, QUARRY TILE, TERRACOTTA
Mode d’emploi
Prêt à l’emploi, pas de dilution nécessaire. Indoor surfaces:
On a dry and clean surface, apply an even coat of FOB with a paintbrush, lambswool or roller applicator.
Before the product dries, about 10 minutes, wipe and rub the surface to allow any excess product to completely penetrate or be removed.Wait 8 hours to apply a second coat if necessary, following the instructions above.The surface may be used for normal foot traffic 8 hours after the final coat.Durcissement complet et protection maximale atteints en 24 heures.Outdoor surfaces:On a clean and dry surface, apply two coats of FOB with a large paintbrush or roller allowing 8 hours between coats.The surface may be used for normal foot traffic 8 hours after the final coat.Durcissement complet et protection maximale atteints en 24 heures.
Do not apply FOB on a previously waxed surface, strip it first. Do not apply FOB during the warmest hours of the day in the summer. Before full application, test the product on a small, inconspicuous area of the surface or loose sample to check for any discoloration. Do not apply FOB outdoors if rain is in the forecast. The product does not protect surfaces from acid stains.
rendement
- All natural stone ›430/861 sq. ft. (40-80 m²)
- Concrete, quarry tile, terracotta ›646/861 sq. ft. (60-80 m²)
- Grout ›1,400 sq. ft. (130 m²)
- Les rendements sont indicatifs et sont par couche appliquée