HYDROREP
à quoi sert-il ?
- Protects exterior surfaces and grout joints from water and humidity.
- Creates a water repellent, breathable barrier.
- Prevents wear caused by weather damage.
- Guards the surface against moss, mold and efflorescence.
- Ideal for thin brick and concrete.
avantages
- Does not alter the material’s natural finish.
- Offers long lasting, renewable protection.
- Offre des taux de rendement très élevés.
- Does not yellow over time.
- High penetration.
idéal pour
- ALL UNPOLISHED NATURAL STONE, CONCRETE, TERRACOTTA
Mode d’emploi
Prêt à l’emploi, pas de dilution nécessaire. On a clean, dry surface apply an even, generous coat of HYDROREP with a brush, roller or airless sprayer.
Apply the product until the surface is fully saturated, then wait 8 hours.
A second coat may be necessary, depending on the absorbency of the material.On dense natural stone apply only one coat.For concrete and porous natural stone, two coats are needed.The surface may be used for normal foot traffic after 8 hours.Durcissement complet et protection maximale atteints en 24 heures.To provide an oil repellent barrier on exterior surfaces, apply a finishing coat of FOB after 8 hours.
Before application, test HYDROREP on a small, inconspicuous area of the surface or loose sample to check for any changes in color. Ne pas appliquer le produit à l’extérieur en cas de prévisions de précipitations. The product does not protect against acid stains.
rendement
- Pierre naturelle ›215 sq.ft. (20 m2)
- Concrete ›54-107 sq.ft. (5-10 m2)
- Les rendements sont indicatifs et sont par couche appliquée