STONEPLUS
à quoi sert-il ?
- Exalte la couleur d’origine de la pierre naturelle polie, adoucie au jet de sable, texturée et vieillie.
- Highlights the natural surface character.
- Protège la surface contre la saleté et les taches d’origine aqueuse ou graisseuse.
- Enhances and intensifies the stone’s natural color with a matte finish.
- Excellente protection pour les plans de travail, les incrustations et les dosserets.
- Cache les craquelures sur les surfaces en granit.
avantages
- Idéal pour les surfaces intérieures et extérieures.
- Ne crée pas de film et ne jaunit pas au fil du temps.
- UV resistant.
- Protection longue durée.
- Les surfaces traitées sont aptes au contact alimentaire.
- Offre des taux de rendement très élevés.
idéal pour
- TOUTES LES PIERRES NATURELLES
Mode d’emploi
Prêt à l’emploi, pas de dilution nécessaire. Apply STONEPLUS to a clean, dry surface using a paintbrush or other suitable applicator.
Wait up to 10 minutes, then rub the surface to allow the product to completely penetrate, until any excess residue is wiped off.
Do not allow excess to dry completely on the surface.Remove any residue by rubbing the surface with a cloth soaked in STONEPLUS.If residue is not removed, the surface will remain sticky.If rubbing the surface with a cloth soaked in STONEPLUS does not work, use mechanical action or a stripper.Denser materials will require maximum time to penetrate the surface.The surface may be used for normal foot traffic after 8 hours.Full cure and maximum sealer protection is achieved in 24 hours.For deeper, more intense color, apply 2-3 coats; wait at least 8 hours between coats.
Once the surface has been treated with STONEPLUS, the treatment cannot not be reversed; the stone cannot return to its original state. Before full application, test the product on a small, inconspicuous area or loose sample. On some materials installed outdoors, we recommend reapplying the product annually to maintain the optimal enhancing effect. The product does not protect against acid stains. Do not apply the product outdoors if rain is in the forecast. Apply and leave the product to dry in a well ventilated area. Keep the product in a cool, dry place.
rendement
- Pierre polie ›510 sq.ft. (47 m2)
- Pierre avec finition naturelle ›205 à 259 pi² (19 à 24 m²)
- Les rendements sont indicatifs et sont par couche appliquée