Crédits pour le LEED
Produit à émissions de COV très faibles qui contribue à la réalisation des crédits pour le LEED.
MP90 ECO PLUS
ASPECT NATUREL PROTECTEUR PÉNÉTRANT
à quoi sert-il ?
- Seals and protects all natural stone, quartz, polished porcelain tile, grout, and terracotta against stains.
- Parfait pour toutes les pierres naturelles aux finitions polies, brossées et adoucies au jet de sable.
- N'altère pas l'aspect naturel du matériau.
- Excellente protection pour les comptoirs de cuisine et les vanités de salle de bain.
- Suitable for encaustic cement tile and reconstituted stone.
- Idéal pour les joints, les carreaux craquelés, la résine de marbre et les dalles de pierre.
- Provides anti-graffiti protection: graffiti can be easily removed from the surface during cleaning.
avantages
- Certified INDOOR AIR COMFORT GOLD*: contains very low VOC emissions with low environmental impact. Contributes towards LEED credits.
- Makes everyday cleaning easy.
- Eco-friendly: solvent free.
- Is not affected by residual humidity: can be applied 24-48 hours after initial cleaning.
- Does not form a film, discolor or yellow over time.
- FAST SETUP: the surface can be walked on after just 4 hours.
- Treated surfaces are safe for food contact.
- Sans APFO : non cancérogène.
- *MP90 ECO PLUS passed rigid requirements to ensure compliance with the low VOC emissions required by international protocols. Products certified Indoor Air Comfort Gold are those with the lowest VOC emissions in their class, hence good for indoor air quality. Indoor Air Comfort Gold certificates are directly accepted as proof from programs for sustainable buildings such as BREEAM New Construction and LEED.
idéal pour
- POROUS AND NON-POROUS NATURAL STONE, QUARTZ, POLISHED PORCELAIN, GROUT, TERRACOTTA
certifications
Tutoriel vidéo
Mode d’emploi
Ready to use, no dilution necessary. Allow new grout installations to cure prior to application.
The product may be applied to damp surfaces after standing water has been removed.
On a clean, dry surface, apply MP90 ECO PLUS with a paint pad, paintbrush, or lambswool applicator, making sure to fully saturate the surface.Let sit for 10 to 15 minutes, keeping the surface wet with sealer without allowing the sealer to dry on the surface.Then, wipe and rub the surface to allow the product to completely penetrate and remove any excess with a dry cloth, applicator pad, microfiber cloth, lambswool pad or sponge.If a second coat is needed, apply it immediately, keeping the surface wet with sealer without allowing the sealer to dry on the surface.Then, wipe and rub the surface to allow the product to completely penetrate and remove any excess with a dry cloth, applicator pad, microfiber cloth, lambswool pad or sponge.Grout release: MP90 ECO PLUS may be used as a grout release for new installations on clean and dry surfaces.The surface may be used for normal foot traffic after 4 hours.Full cure and maximum sealer protection is achieved in 8 hours.
Attention
In order to be treated, outdoor flooring must be frost resistant and should be installed correctly, according to site requirements, including the correct slope, movement joints, and the insulation of the terrain. Before full application, test the product on a small, inconspicuous area of the surface or loose sample to check for any discoloration. Apply and leave the product to dry in a well ventilated area. Do not apply the product outdoors if rain is in the forecast. MP90 ECO PLUS does not protect surfaces against acids stains.
rendement
1 gal US (3,78 L)
- Carreaux de porcelaine ›1 206 à 1 637 pi² (112 à 152 m²)
- Pierres naturelles polies ›819 à 1 206 pi² (76 à 112 m²)
- Unpolished natural stone ›388 à 819 pi² (36 à 76 m²)
- Quartz ›2,000 sq.ft. (186 m²)
- Grout ›1,600 sq.ft. (149 m²)
formats
Bidons de 5 litres : cartons de 4 bidons
Flacons de 250 ml : cartons de 12 pièces
Bidons de 1 litre : cartons de 6 bidons
