No dilution required: ready to use.

Application:
For materials with matt finish (indoors and outdoors):Apply the product evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well. Dab any excess product with a clean cloth before it dries (roughly 10-15 minutes).For glossy or brushed finishes (indoors and outdoors):Apply FOB XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad. Before the product dries (roughly 10-15 minutes), rub the surface and remove any residues using a microfibre cloth wetted with the product. Dry the surface with a clean cloth.When requested on high-absorption materials, apply two coats of the product with an 8-hour interval in between (e.g.: highly-trafficked areas, humid areas, outdoor surfaces).To speed up the process, it is possible to treat the surface with a single-disc machine.To complete the cycle with the finish: on porous materials such as natural stone, reconstructed tiles, agglomerates and cement tiles laid in indoor environments, a finishing wax can be applied depending on the material and on the desired effect (MATT for a natural effect, SATIN for a satin effect, LONGLIFE or CLASSIC for a polished effect, if available for sale).The surface can be walked on after just 8 hours.The stain-proofing effect starts after 24 hours.For ordinary maintenance: use a diluted solution of CLEANER PRO (1:200)