Cleaning natural stone floors of glue or resin residue has always been considered a titanic undertaking, often resulting in complete failure or, in a worst case scenario, even worsening the damage, with the resin or glue being spread over an even larger area of the floor. But now, the right product is available for removing resin from stone floors: PS87PRO.
Removing glue, resin and stick tape from natural stone surfaces
Apply PS87PRO (diluted approx. 1:3 on surfaces previously dampened with water), and rub with an abrasive sponge. Rinse thoroughly.
To remove surface residue, you can also use ZERO SIL*: apply the undiluted product over the entire stain, leave it to act for 20 minutes, then scrape it off with the spatula included in the kit. You can then pick up the residue with paper towel or a cloth.
For treated indoors floors, the protective treatment should be restored after cleaning.
*check product availability in your market