PRW200
PRE-GROUTING PROTECTIVE AGENT
a cosa serve
- Water-based water-repellent protector against soiling that occurs when fixing. Makes grouting and cleaning easier without altering the material’s appearance.
- Ideal for absorbent materials such as terracotta, quarry tiles, natural and reconstructed stone and agglomerates.
vantaggi
- Protects against grouting.
- It does not affect adhesion between grout and material.
- It makes cleaning after laying simple.
- It reduces drying times, making subsequent treatment faster.
- Does not affect the material’s appearance.
- Nonsacrificial protective sealer.
- Easy to apply.
- After application a protective treatment can be carried out
- This product has extremely low VOC emissions: EC1Plus-classified
- Helps to obtain target LEED credits
- An A+ classified product in accordance with the French VOC regulation
ideale per
- UNPOLISHED STONE AND AGGLOMERATES
- TERRACOTTA
- QUARRY TILES
Come si usa
No dilution required: ready to use.
Application:
Shake before use. Remove any dust from the surface to be treated.Apply one coat of PRW200 using a flat paintbrush, fleece or other applicator in a uniform manner, avoiding any pooling. Also apply to the edges of the laid material with care. The surface can be grouted the day after application. Once thoroughly set, wash the surface using the most suitable cleaner for the type of material used.Assess which type of subsequent protective treatment to complete the protection cycle.FOR PROFESSIONAL USE ONLY:spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as specified in the safety data sheet.
Carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product outdoors if rain is in forecast.
resa
- Terracottarustic Tuscan, polished
- 15-20 m²Terracotta
- handmade, Spanish, hollow tile, brick7-10 m²
- Stone10/20 m²
- “Coverage shown is indicative and refers to single coats”
formati
5-litre cans in boxes of 4
1 litre cans in boxes of 12
