OLD-social-instagramapp-storearea-applicatoriarea-privatiarea-produttoriarea-progettistiarea-rivenditoriarrow-downarrow-rightbackbookcalculatorcarousel-leftcarousel-rightcart-2cartclosecontrolsdownloademailenvelopeeyefai-da-te-iconfilterfinituraflaggoogle-playlinklock-altlogo-anniversariologo-fila-2023_negativelogo-fila-footerlogo-filalogo-recommendedmailmarker-2marker-filamarkermateriali-esternomateriali-finituramateriali-internomateriali-lavaggiomateriali-manutenzionemateriali-pavimentomateriali-pretrattamentomateriali-protezionemateriali-rivestimentomateriali-topnewsletter-arrownewsletterpagenav-gridpagenav-nextpagenav-prevphone-2phone-filledphoneplay-2playplusprintprofessional-iconprotezionepuliziaquestionsearchshare-facebookshare-googleplusshare-linkedinshare-twittersharesistemislider-arrow-leftslider-arrow-rightsocial-facebooksocial-flickr-bnsocial-flickrsocial-instagramsocial-instagram_newsocial-linkedinsocial-pinterestsocial-twittersocial-youtubetoolbar-apptoolbar-capitolatotoolbar-certificationstoolbar-downloadtoolbar-eyedroppertoolbar-performance-warrantytoolbar-product-compliancetoolbar-product-safetytoolbar-product-sheettoolbar-product-techtoolbar-recycletoolbar-retailertoolbar-supporttoolbar-videotutorialupload-file
Hvad gør jeg, hvis...

ZEROSIL

SILICONE REMOVER

ZEROSIL
ZEROSIL

ZEROSIL

SILICONE REMOVER

anvendelsesområde

  • Removes residues of silicone, glue, adhesive tape, old labels and polyurethane foam.
  • Also effective for removing candle wax residues, resin and greasy/oily superficial stains in general.
  • It is quick and handy to apply with the included spatula.
  • Effective also in removing tar and bitumen stains.

fordele

  • Can also be used on marble, stone, grouting joints and other absorbent materials to remove surface residues.
  • Viscous consistency: acts directly on the residue you want to remove, thus optimising its effect and avoiding wastage.
  • Quick acting: it dissolves hardened silicone in 20 minutes.
  • Has a pleasant citrus fragrance.

ideel til

  • PORCELAIN TILES
  • CERAMIC TILES
  • MARBLE
  • GLASS
  • METAL

før og efter

Videovejledninger

Brug

No dilution required: ready to use.

Application:
1. If the residue is particularly stubborn, remove as much as you can with a sharp-edged tool (box cutter, knife or other blade) taking care not to damage the surface.2. Shake before use, then apply the product undiluted, so as to cover any silicone residue.3. Leave to act for about 20 minutes.4. Once the indicated time has elapsed, use the included spatula to scrape off the dissolved residue, then remove it with a cloth or paper towels.5. If necessary, repeat the application and leave it to act for longer.6. Clean the spatula thoroughly after use with a cloth or paper towels.

Advarsel

The product may dull methacrylate, plastic and coated surfaces and resin-based agglomerates, it should first be tested on these surfaces to verify their resistance. If the affected surface was treated with wax, the treatment must be renewed.

About us

Excellent product! It just took one spray to get rid of a patch of mould on the wall, without leaving a trace. The bathroom’s as good as new. Highly recommended!
Lucia Vitali

Vælg dit sprog