The product you are viewing is not available in your country
NATURAL LOOK STAINPROOF SEALER
1 Ltr
what's it for
- Protects against the absorption of water and stains.
- Does not yellow or create a film.
- Ideal for the protection of tables and worktops in kitchens and bathrooms.
advantages
- Makes everyday cleaning easy.
- Does not alter the appearance or surface finish.
- Treated surfaces are safe for food contact
- Contains biodegradable ingredients.
- Natural look.
- Water-based technology.
- Interior and exterior use.
- On polished materials, the product may be used as a pre-grouting sealer.
ideal for
- UNPOLISHED AND POLISHED NATURAL STONE, TERRAZZO AND POLISHED PORCELAIN
Method of use
The product is ready to use. No dilution necessary. To seal surfaces: on a clean, dry surface apply NATURAL LOOK STAINPROOF SEALER evenly using a brush or microfibre applicator.
Leave the product to penetrate the material and grout.
Remove any excess within 15 minutes by rubbing the surface with a clean and dry microfibre cloth.The treated area should not appear shiny or have a film on the surface.For very absorbent materials (such as limestone, terracotta and unpolished stones), apply a second coat within 20 minutes following the above instructions.The surface may be used after 4 hours, and the stain protection is active after 24 hours.Maintenance: apply MULTI SURFACE CLEANER diluted 1:200, approximately 3 capfuls of product in 5L of clean water.
Test the product on a small, inconspicuous area of the surface to check for discolouration. Do not apply product outdoors in wet weather. Do not apply the product outdoors during the warmest hours in the summer. The product does not protect against acid aggression.
coverage
- Porous and absorbent surfaces:7-10 m²
- Surfaces with low absorbency:20-30 m²
- Porcelain40 m²
formats