SATIN
SATIN-EFFECT PROTECTIVE WAX
what's it for
- Ideal both for treatment and maintenance.
- Protects unpolished natural stones (limestone, slate, etc.), red stoneware, non-vitrified quarry tiles and various types of terracotta.
- Recommended for treating floors made of: slate, manufactured stone and cement tiles.
- Highly recommended for maintenance of marble and natural stone with brushed finish.
advantages
- A 3-in-one solution: protects, maintains and gives floors an excellent finish.
- Original new satin look.
- Ideal to create prestigious floors: enhances the beauty of the surface.
- Easy to apply and maximum coverage.
- Does not degenerate with maintenance.
ideal for
- TERRACOTTA
- QUARRY TILES
- UNPOLISHED STONE AND AGGLOMERATES
- CONCRETE
- CEMENT TILES
Method of use
Dilution: either undiluted or diluted according to requirements. For protecting surfaces:
using fleece or other applicator, apply an even coat of the product on the clean and dry floor. After 1 hour, apply a second coat at right-angles to the first. The floor can be walked on after roughly half an hour.
When treating highly absorbent materials, we recommend applying a coat of FOB XTREME or W68 beforehand. Wait 24 hours before applying SATIN.Renewal of the finish (every 2-3 months):after having cleaned the surface with a diluted solution of CLEANER PRO (1:200), apply SATIN by diluting 500 ml of product in 5 litres of water. The floor can be walked on once dry.Restoration of the protection:remove the wax from the surface using the PS87 PRO detergent, diluted 1:5. Rinse the surface. Apply the undiluted wax on the dry floor using fleece or other applicator. No need to polish.CLEANING OF TOOLS: clean with water after use.For ordinary maintenance: use a diluted solution of CLEANER PRO (1:200)
Do not walk on floor while it’s drying and do not repeat application on treated areas which are not yet dry. To remove this wax, use the specific wax-remover PS87 PRO. Do not use the product on external surfaces, in damp environments and where water puddles may form (bathrooms, showers). The product can change the appearance of the material, first spot test a small surface area to check for any changes.
coverage
- Terracotta30 m²
- Stone30-40 m²
- Coverage shown is indicative and refers to single coats
formats
5-litre cans in boxes of 4
1 litre cans in boxes of 12