HYDROREP
WATER-REPELLENT PROTECTION
what's it for
- Protects outdoor floors from water and damp.
- Makes walls and coverings water-repellent.
- Ideal for concrete.
- Protects grout joints.
- Protects against deterioration due to weather conditions.
advantages
- It provides a breathable, lasting and renewable protection.
- Does not affect the material’s natural look.
- Does not yellow with ageing or with any environmental condition.
- High penetration depth.
- Provides high coverage.
- Prevents moss and mould formation.
- It protects against efflorescence.
- An A+ classified product in accordance with the French VOC regulation
ideal for
- UNPOLISHED MARBLE AND GRANITE
- UNPOLISHED STONE AND AGGLOMERATES
- CONCRETE
- MANUFACTURED STONE
before and after
Video tutorial
Method of use
No dilution required: ready to use.
Application:
Apply HYDROREP on a clean and dry surface using a brush or other application method in a regular manner, with two coats with an 8-hour interval in between.In case of poorly absorbent stone surfaces (e.g. slate), a single coat of the product is sufficient.To complete the cycle with an oil-repellent protection: apply the FOB XTREME stain-proof sealer instead of the second coat of HYDROREP.The surface can be walked on after just 8 hours.The water-repellent effect starts after 24 hours.FOR PROFESSIONAL USE ONLY:To apply the product with an airless system or other spray applicators, use the appropriate PPE, as indicated in the safety data sheet.
Since there are so many different materials, before applying the product we recommend testing it on a small area of the surface to check for any colour changes. Do not apply the product outdoors if rain is in forecast. Does not protect against acid aggression.
coverage
- Natural stone10/20 m²
- Concrete5 m²
- Coverage shown is indicative and refers to single coats
formats
5-litre cans in boxes of 4
1 litre cans in boxes of 12
