CONCRETE SHIELD
COLOUR-ENHANCING STAINPROOFING PROTECTOR FOR CONCRETE
a cosa serve
- Enhances indoor and outdoor concrete surfaces and protects them against stains and water.
- Creates a barrier that facilitates the removal of oil and grease before they penetrate the surface.
- When applied outdoors on interlocking pavers, marble-chip tiles and stamped concrete, it makes surfaces resistant to weathering.
- Strengthens industrial floors in warehouses, showrooms and garages and makes them dust resistant.
- When applied on residential flooring, the treatment may be completed with a wax finish.
vantaggi
- Eco-friendly: does not contain hydrocarbon solvents.
- Reversible treatment.
- Consolidating and dust-resistant action.
- UV resistant (ASTM G154).
- Water-based: not affected by residual moisture, hence drastically reducing on-site work time.
- An A+ classified product in accordance with the French VOC regulation
ideale per
- CONCRETE
- STAMPED CONCRETE
- INTERLOCKING PAVERS
- MARBLE CHIP CEMENT TILE
Come si usa
No dilution required: ready to use.
Application:
Shake before use. On a clean and dry surface, apply CONCRETE SHIELD uniformly using a flat paintbrush, fleece or roller.Once the first coat has dried (after 4 hours), in case of absorbent surfaces, apply a second coat of the product in the same manner.For indoor domestic environments:4 hours after the application of CONCRETE SHIELD, apply one coat of finishing wax to obtain the desired effect. (MATT matte finish or LONGLIFE glossy finish).For exteriors:the product should be applied annually to maintain the surface colour enhancement in optimal condition.
If the product is applied incorrectly or the surface protection must be entirely restored, remove CONCRETE SHIELD with PS87 PRO. On indoor residential flooring (micro concrete, quartz concrete, etc.), test the product on small inconspicuous area to check the product’s compatibility with the surface before treatment. On smooth or polished concrete, CONCRETE SHIELD may not adhere correctly. Hence, we recommend testing the product before full application. Do not apply the product outdoors if rain is in forecast. We do not recommend applying the product in damp environments and where water tends to stagnate. If the product is applied on groutless installations, the protection refers exclusively to the top surface of the tile. Test the colour enhancing effect on a small, inconspicuous area before full application. For regular and heavy-duty cleaning and maintenance, do not use alkaline degreasing cleaners. Use only CLEANER PRO neutral cleaner.
resa
- Concrete10-15 m²
- “Coverage shown is indicative and refers to single coats”
formati
5-litre cans in boxes of 4
