Certified Indoor Air Comfort Gold
Product with low VOC emissions which guarantees high indoor air quality
MP90 ECO XTREME
EXTREME ECO-COMPATIBLE WATER- AND OIL-REPELLENT PROTECTION
a cosa serve
- Water- and oil-repellent with natural finish.
- The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt smoothed finishes.
- Reduces absorption without affecting the material’s natural look.
- It waterproofs, protects and facilitates cleaning.
- It is also ideal for grouting joints, ceramic and crackle effect surfaces, terrazzo, resin-marble, and stone slabs.
- Is also suitable for treating coloured cement tiles and manufactured stones.
- It provides an anti-graffiti protection that prevents graffiti paint from bonding to surfaces. It speeds the cleaning process because graffiti can be easily removed.
- Water- and oil-repellent: it hampers the absorption of common watery and oily stains.
vantaggi
- A product with an extremely low VOC and a low environmental impact; it also has the INDOOR AIR COMFORT GOLD certificate
- Free of hydrocarbon solvents: eco-friendly treatment
- Being a water-based product, it withstands residual humidity conditions and can therefore be applied 24–48 hours after the initial wash, thus speeding up the treatment
- Single-coat application: apply the product and rub it gently over the surface until it is completely absorbed
- Does not form surface film and does not yellow
- Ideal for protecting tables, as well as kitchen and bathroom tops
- The surface can be walked on after just 2 hours*
- *Application conditions:
- temperature = 20°C
- humidity < or = 60%
- Apply according to the indications shown on the label.
ideale per
- POLISHED PORCELAIN TILES
- MARBLE AND GRANITE
- NATURAL STONE AND AGGLOMERATES
- CONCRETE
certificazioni
Video tutorial
Come si usa
No dilution required: ready to use.
Application: Shake before use.
For materials with matt finish (natural stone, terracotta, agglomerates, cement tiles):Apply MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well.Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of product with a 20-minute interval in between.For polished porcelain tiles, natural stone, agglomerates with glossy finish:Apply MP90 ECO XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad.Before the product dries (roughly 10-15 minutes), rub it using a microfibre cloth wetted with the product to favour its penetration. Dry the surface with a clean cloth. To speed up the process, it is possible to treat the surface with a single-disc machine.To complete the cycle with the finish:On porous materials such as natural stone, reconstructed tiles, agglomerates and cement tiles laid in indoor environments, a finishing wax can be applied depending on the material and on the desired effect after 4 hours (MATT, SATIN, CLASSIC, LONGLIFE).The surface can be walked on after just 2 hours.Water- and oil-repellent protection takes effect after 24 hours.Maintenance:use a diluted solution of CLEANER PRO.
Attenzione
Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product outdoors if rain is in forecast. Does not protect against acid aggression.
resa
With one litre of product:
- polished porcelain tiles30-50 m²
- Polished Marble/Granite20-30 m²
- Matte polished stone10/20 m²
- “Coverage shown is indicative and refers to single coats”
formati
5-litre cans in boxes of 4
375 ml bottles in boxes of 12
1-litre cans in boxes of 6
