HYDROREP
WATER-REPELLENT PROTECTION
para qué sirve
- Protects outdoor floors from water and damp.
- Makes walls and coverings water-repellent.
- Ideal for concrete.
- Protects grout joints.
- Protects against deterioration due to weather conditions.
ventajas
- It provides a breathable, lasting and renewable protection.
- Does not affect the material’s natural look.
- Does not yellow with ageing or with any environmental condition.
- High penetration depth.
- Provides high coverage.
- Prevents moss and mould formation.
- It protects against efflorescence.
- An A+ classified product in accordance with the French VOC regulation
ideal para
- UNPOLISHED MARBLE AND GRANITE
- UNPOLISHED STONE AND AGGLOMERATES
- CONCRETE
- MANUFACTURED STONE
antes y después
Vídeo tutorial
Modo de empleo
No dilution required: ready to use.
Application:
Apply HYDROREP on a clean and dry surface using a brush or other application method in a regular manner, with two coats with an 8-hour interval in between.In case of poorly absorbent stone surfaces (e.g. slate), a single coat of the product is sufficient.To complete the cycle with an oil-repellent protection: apply the FOB XTREME stain-proof sealer instead of the second coat of HYDROREP.The surface can be walked on after just 8 hoursThe water-repellent effect starts after 24 hours.FOR PROFESSIONAL USE ONLY:spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as specified in the safety data sheet.
On natural stone carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product outdoors if rain is in forecast. Does not protect against acid aggression.
rendimiento
- Natural stone10/20 m²
- Concrete5 m²
- “Coverage shown is indicative and refers to single coats”
formatos
5-litre cans in boxes of 4
1 litre cans in boxes of 12
