FASEZERO
CONCENTRATED STAIN REMOVER AND SURFACE PREPARER
para qué sirve
- It prepares surfaces for the protective treatment by degreasing and removing the most stubborn dirt.
- It removes any excess non-film-forming waterproofing sealers, also in the event of incorrect application.
- A preparatory product recommended for surface preparation prior to treatment with SALVATERRAZZA® and SALVATERRAZZA®ECO.
ventajas
- Contains biodegradable ingredients
- High performance
- Guaranteed results
- Fast action
- Vigorous cleaning action
- VOC-free
- Improves the absorption of SALVATERRAZZA® and SALVATERRAZZA® ECO.
ideal para
- STONE AND AGGLOMERATES
- PORCELAIN TILES
- CEMENT AGGLOMERATES
- CONCRETE
- TERRACOTTA
- EXPOSED BRICKS
- QUARRY TILES
antes y después
![Antes del tratamiento FASEZERO](https://www.filasolutions.com/media/397/w-685/salvaterrazzafasezero-prima.jpg)
![Después del tratamiento FASEZERO](https://www.filasolutions.com/media/396/w-685/salvaterrazzafasezero-dopo.jpg)
Modo de empleo
Dilution: According to use.
Application instructions
For preparing heavily soiled surfaces, prior to the application of protective treatments such as non-film-forming oil and water repellents: first, wet the surface with water. Then, dilute the product 1:5, apply the mixture on the surface and leave to react for 2–3 minutes.Rub with a floor scrubbing brush, single-disc machine or abrasive sponge.Remove residues of the solution using a liquid vacuum cleaner or cloth and rinse thoroughly with water.For deeper cleaning, dilute the product 1:3.Apply the chosen protective treatment on a clean and dry surface. FASEZERO is a preparatory product recommended for surface preparation prior to treatment with SALVATERRAZZA® and SALVATERRAZZA® ECO.In the event of incorrect application of non-film-forming water and oil repellent treatments, or to remove any excess SALVATERRAZZA® and SALVATERRAZZA® ECO:apply the undiluted product directly onto the surface using a paintbrush.Leave to react for 15 minutes, rub with a brush or single-disc machine and rinse well with water.Repeat the application in the event of stubborn treatments.
Do not use on new polished marble and stone or on wood. Avoid contact with metal surfaces (rinse them thoroughly if this happens). Always perform a preliminary trial on a small area of the surface. On bricks and terracotta surfaces, we suggest performing a neutralising wash with DETERDEK PRO after applying FASEZERO.
rendimiento
- Undilutedup to 10 m²
- Dilutedup to 30 m²
- Coverage rates are indicative.
formatos
5-litre cans in boxes of 4
1 litre cans in boxes of 12